NV216C-RTK-A GNSS/RTK/INS Receiver Board
The NV216C-RTK-A GNSS receiver board is a fully integrated multi-frequency multi-constellation satellite navigation receiver with embedded RTK & Heading functionality.
Share
Description
Overview
The NV216C-RTK-A GNSS/RTK/INS receiver board is fully compatible with GPS, GLONASS, Galileo and BeiDou global navigation satellite systems (GNSS). The NV216C-RTK-A device is specifically designed for use in high accuracy applications, demanding low cost, low power consumption, small form factor and uncompromised performance.
Features
- Multi-frequency GPS, GLONASS, GALILEO, BeiDou, SBAS
- Up to 30 km Base line support
- RTK Positioning, Heading + Pitch/Roll
- Improved Multi-frequency RTK Engine
- Improved GNSS+INS Engine
- Base and Rover mode
- Data rate up to 500 Hz (INS mode)
- Centimeter-level positioning in RTK mode
- Individual GLONASS group delay calibration
- Automatic GLONASS inter-frequency calibration
- Enhanced RAIM for 3D and RTK modes
- Low power consumption
- Simple quick integration
- NMEA 0183, RTCM 3.1 communication protocols
- Industrial operating temperature range ‐40 °C to +85 °C
Applications
- Applications
- Construction, Mining and Industrial
- Environmental & Structural Monitoring
- Machine Control & Automation
- Parallel Driving Systems
- Precision Agriculture
- Unmanned Aerial Vehicle (UAV)
- Robotics and Intelligent Machines
- Land Surveying, 3D Cartography, Air Photography
Technical Specifications
| GNSS Signals | |
| Number of Channels: | 216 |
| GPS: | L1, L2 |
| GLONASS: | L1, L2, L3 |
| Galileo: | E1, E5b |
| BeiDou: | B1, B2 |
| SBAS: | L1 |
| Navigation Features | |
| Accuracy (2D rms): | Autonomous mode 2.5 m SBAS <1 m RTK mode 1 cm + 1ppm |
| Velocity Measuring Precision: | 0.05 m/s (RMS) |
| Sensitivity: | Tracking and re-acquisition –160 dBm Acquisition –143 dBm RTK mode –137 dBm |
| Coordinate Systems: | WGS-84 |
| Time to First Fix: | Cold start < 40 s Warm start < 35 s RTK initialization time (after 3D fix) < 10 s Initialization reliability 99.9% |
| Environmental | |
| Operating Temperature: | -40 °C to +85 °C: |
| Maximum Operating Humidity: | 98% @ 40 °С |
| Data Interface | |
| PVT amp;& Heading Output Rate: | 1, 2, 5, 10, 20 Hz |
| Max Data Output Rate with INS: | 50 Hz |
| Supported Protocols: | NMEA 0183 RTCM 3.0, 3.1 |
| Host Data Interfaces: | 2x UART (3.3V CMOS-level) 1х USB 3.3V (D+, D-) |
| Data Connector: | PLD-20 male |
| Antenna Connector: | MCX female |
| Data Exchange Rate: | Up to 460’800 bits/s/td> |
| RF Functionality | |
| LNA: | Built-In (SW controlled for power saving) |
| RF Structure: | Six RF FE chains |
| Antenna Type: | Active |
| Physical | |
| Dimensions: | 46 mm (L) х 38 mm (W) х 9 mm (H) |
| Weight: | 14 g (without package) |
| Power Supply | |
| Power Supply Voltage: | 3.3V – 5.0V |
| Power Consumption: | GNSS RTK-navigation – 600 mW (typical) GNSS RTK-navigation & Heading – 1000 mW (typical) |
Video
Ordering
The NV216C-RTK-A GNSS/RTK/INS receiver board from NVS Technologies can be ordered through Canal Geomatics. For more information, please contact us using the Request Pricing form.
